Sunday, October 6, 2019

Asset Inventory Essay Example | Topics and Well Written Essays - 1250 words

Asset Inventory - Essay Example Account Management Procedure Avoid transmission of un encrypted sensitive data Software Application and Operating system software Exploitation of faults in application and operating system software $2,000,000 High Malicious use, Unauthorized use and System compromise Change Management Standard High 0.8 Low 0.05 0.2 LOW $24,000 IT System Interoperability Security Standard Patches and updates from a reliable sources Hardware Internal server Hardware Issues/Equipment Failure or loss Loss or theft of data from server $8,000, 000 Vital System Unavailable Data Backup and System Restore Standard High 0.8 Low 0.05 0.2 LOW $96, 000 Continuity of Operations Planning Standard Equipment failure is addressed by design, policy or the stated practice. Databases Inadequate Database Support Data corruption or loss $500,000 critical Computer crime, system compromise, unauthorized access Data Storage Media Protection Standard Medium 0.7 Low 0.05 0.3 Low $9750 Remote Access Standard Project Management S tandard Maintenance of databases is sustained and supported at appropriate security levels Data Disclosure Disclosure of sensitive personal information issues. $100,000, 000 low Malicious use, system compromise, unauthorized access Data Classification Standard Medium 0.7 Medium 0.1 0.3 MODERATE $390,000 Acceptable Use Standard Data is made known only to individuals who have a true operational need for the data. Asset Inventory Introduction An IT oriented company is more prone to information security risks than a regular institution. The company in consideration, Employment Development Department (EDD) provides services to millions of people under Disability Insurance program which is a complex task requiring complete security to its clients. The company also offers other services such as Unemployment Insurance, payroll taxes audit and collection, labor and workforce information among others serving a workforce of over 15 million individuals. The company information assets inventory is conducted using Asset Inventory and Risk Assessment table and shows threat analysis for some selected assets, their associated threats and the top risks faced by the company and the strategies taken to mitigate them. The strategies ensure achievement of goals, management of risks; make use of resources, and carefully assesse the achievement of the information assets security program. Information assets for the company entails all aspects of information may it be spoken, written, printed or electronic. It also covers information handling that involves information creation, viewing, storing or transporting. The information assets that exist in the Company Information assets for this agency encompasses hardware / physical devices that include computer equipment, internal server and Removable Media such as key drives, Data CD/DVDs and portable external) hard drives. Software Applications, operating systems, development tools and utilities are also constituted in the information asset inventory. Processes in computing and transmission of critical data (ccommunications), Information databases, system documents and standards and filled information are integral components of asset inventory. On another note human resource especially system administrators

Friday, October 4, 2019

Mexico Term Paper Example | Topics and Well Written Essays - 1000 words

Mexico - Term Paper Example Small pox, unknowingly brought in by the Spaniards, ravaged the Aztec Empire killing millions including the ruling Emperor. It confirmed the victory of Cortes and under him the Spanish invaded the territory and ruled it as the Viceroyalty of New Spain. This is what would become Mexico later on. The Spanish rule continued in Mexico for the next 300 years till 1810 when the Mexicans led their first revolution to freedom which they gained in 1821. The colonial Spanish rule witnessed territorial expansion across a huge part of Central America and a lot of it to the south and west of what is now the United States. Trade and commerce swelled and the time saw a flourishing mining, textile, and agrarian economy. There was large scale religious conversion to Roman Catholicism. However, by early nineteenth century resentment simmered among the locals and set the tempo for a revolution. Independence. Miguel Hidalgo y Costilla and Jose Maria Morelos were the main protagonists of the revolution. Both of them led successful run-ins one after the other but were executed: Costilla was executed by the firing squad in 1811 and Morelos was captured and shot in 1815. However, the struggle for independence did not slack momentum and continued under the Creole colonel Agustin de Iturbide. In 1821 the independence of Mexico was officially recognized after Iturbide along with representatives of the Spanish crown signed the Treaty of Cordoba and the Declaration of Independence of the Mexican Empire. Iturbide declared himself emperor of the First Mexican Empire. He was overthrown in 1823 and the United Mexican States was formed. Forms of Government. The military rule ended thus with the United Mexican States being declared a federal republic and Guadalupe Victoria becoming the first President of the newly formed country in 1824. However, this was not the beginning of an organized era. The country was steeped in turmoil of many a kind. In 1836 General Antonio Lopez de Santa Anna, a rebel general and dictator, suspended the 1824 Constitution and a civil war ensued. His radical reforms dissolved republicanism and institutionalized the centralized form of government. The landmark event that followed was the Mexican-U.S. war in which Mexico lost Texas, California, and New Mexico to the U. S. Close at heels were Native American revolts and a series of reforms which brought back the federal form of government. In 1861 the Liberals won and the country was led by President Benito Juarez. He is worth a mention because the country underwent drastic democratic and economic reforms and cessation of Church powers. However, chaos set in soon imposed by the monarchy of Austrian Archduke Maximilian who declared himself Emperor in 1864. He was executed by the Liberal forces under Juarez who continued his term of presidency till 1872. Juarez period is also termed Restoration of the Republic. Weak governments followed. The next noteworthy period was the presidency of the authoritaria n general Porfirio Diaz who ruled most of the years between 1877 and 1911. The military dictatorship of Porfirio went well with Mexico that saw phenomenal economic reforms and progress in science and art. But his political repression snowballed into yet another revolution in 1910 which continued till 1920. The significant leaders who paced through the turbulence include Francisco

Thursday, October 3, 2019

The History of the Noose Essay Example for Free

The History of the Noose Essay The origins of the noose, also known as the hangman’s knot, can be traced to both colonial America and England, and continues to be used today in some US states as well as other nations that still use hanging as a form of capital punishment. The uniqueness of the noose as compared to other forms of rope typing lies in its number of coils and the way it is done; most professionally done nooses have 6 to 8 coils, which can be adjusted depending on the purpose for which it is intended for. The notoriety of the noose however, lies not only in its use as a method of capital punishment. It has also been associated as a racial hate symbol, so far being used in the United States against African-Americans. This is in reference to the various forms of extermination performed against African-Americans in the rural South in the past. To address such, the use of nooses for the intention of perpetrating a hate crime, or using nooses as a racial hate symbol, was made illegal under U. S. law. Recently, there have been cases where the hanging of nooses was done at American universities in what many see may be a resurgence of the symbol. A widely known incident that recently happened was where six black teenagers got into a fight with six white teens over the hanging of nooses in the trees. The case was brought to court and is now known as the â€Å"Jena Six† affair. In totality, nooses can be said to be very significant to African-Americans, but not in a good sense. If anything, the noose represents a direct attack on their race, and the move to make it illegal was definitely a step in the right direction. Just as the noose gained its reputation with being a form of capital punishment, it too has become a racially charged symbol that continues to affect African-Americans today.

Investigation of Fracture Energy GF

Investigation of Fracture Energy GF ABSTRACT Concretes inherent brittleness, low tensile strength and premature micro-cracking phenomena can be improved, in the bulk material, by embedment of carbon nanotubes (CNTs), the 1-D allotrope of carbon which exhibit a remarkable combination of mechanical and transport properties. The present research aims in investigating the fracture energy, Gf, of modified cement mortar with Multi Wall Carbon Nanotubes (MWCNTs) under 3-point bending test with acoustic emission (AE). According to Rilem recommendation, it is reported that using the fracture toughness of mortars reinforced with variable loadings of multi-walled carbon nanotubes it can be determined the fracture energy, Gf. Moreover, it is widely known that fracture energy depends on both geometry and size of the test specimen. The results of load, CMOD, AE-activity and AE-energy are analyzed. 1. Introduction As the most widely used structural materials, concrete has been developed to meet constantly renewed requirements raised by construction of more and more structures [1]. Great research efforts are continuously invested towards improving its inherent brittleness, low tensile strength and premature micro-cracking phenomena by the introduction of third phases throughout its volume. While endowment of reinforcement and ductility are conventionally achieved through embedment of steel rods, additional reinforcement of the continuous phase can be achieved through the introduction of other micro- and nano-scale media [2-5]. However, an obvious shortage of concrete with largely enhanced strength grade is brittleness, which is of great concern related to the structural safety. Recent studies have focused on improving the properties of concrete with the addition of nanomaterials such as carbon nanotubes (CNTs) or carbon nanofibers (CNFs). In addition, fibers control the crack patterns and determine failure modes of concrete members [6-9]. There are many fibers utilized in cement and concrete materials. The most common fibers are glass, carbon, aramid, polypropylene, and basalt fibers. The revolutionary one-dimensional allotrope of carbon with Youngs moduli approaching 1.4 TPa, seven times higher than of high-strength steel and tensile strengths above 100GPa, fifty times higher than the same reference material. At this moment the nanocomposite materials are considered the next generation materials for electronics, aeronautical, civil engineering and other applications [4, 10-13]. Carbon nanotubes have minimum diameters of 0.4nm and are classified as single- or multi-walled (SWCNTs and MWCNTs, respectively) and they produced by chemical vapor deposition (CVD) and its variants (low pressure, thermal, catalytic and others). The most popular and affordable choice due to low commercial price are the ÃŽÅ“WCNTs but they have slightly inferior performance than SWCNTS which are lot expensive. Carbon nanofibers (CNFs), a similar nanostructured material comprised of cylindrically-shaped arrangements of stacked graphene plates or cones, have also been suggested as nano-re inforcements for concrete [14]. At nanocomposite materials a very important factor which will enable efficient load transfer from the cement matrix to the tubes, is the achievement of homogeneous dispersion of tubes within the continuous phase. The dispersion of MWCNTs, ideally without significant reduction in their high initial length and aspect ratio, usually achieved through the use of surfactants and sonication processes. This part attracts rigorous scientific efforts because CNTs tend to agglomerate together due to their high surface area and the strong Van der Waals forces acting between them. The agglomerates are responsible not only for stress concentration within the cement matrix which leads to strength degradation during service life, but also to premature crack initiation and propagation [15, 16]. On the other hand, there are a lot of studies which have referenced that surfactants create side-effects in cement matrix. Makar et al. reported strong early-age bonds between cement paste and CNTs[17]. Yazdanbakhsh [14] reported incompatibility issues, during the hydration phase, between cement base and the surfactants used for improving CNT dispersion. In addition the study observed reduction in aspect ratio length/diameter of MWCNT during exposure of the tubes to the high sonication energies required for disentanglement. It was suggested that the favorable dispersion characteristics found in aqueous environment does not guarantee a similarly favorable dispersion within the cement matrix. Enhancement of cements flexural toughness by CNTs hasnt been investigated largely by researchers and so there isnt a wide variety of reports. To the authors knowledge only one reference, Stynoski et al. [18] studied the fracture properties of Portland cement mortars containing carbon nanotubes, carbon fibers and silica fume using notched three-point bending test. They observed that using silica fume and carbon nanotubes together there was improvement in toughness about 35% and increment about 56% on critical crack tip opening displacement (CTODc) at 28 days. In addition using only carbon nanotubes provided. On the other hand, using only carbon nanotubes serves to increase in fracture toughness of about 5-10% at 7 and 28 days of age. In addition, the effect of carbon nanotubes has as result to increment the CTODc about 20% improvement at 28 days. But there are several of investigations which study the fracture properties of micro-fiber reinforced mortar with various additives. For exa mple, Moukwa et al. [19] studied the effect of alumino-silicate clays on the critical stress intensity factor and CTODc. They found that the use of silica fume and alumino-silicate clays increased the values of KIC, CTODC and the compressive strength of cementitious materials. In addition alumino-silicate clays are incorporated as substitutes for a fraction of the cement, the total porosity of hardened mixtures increases compared to that of hardened cement paste with no clay addition. Sarker et al. [20] studied the fracture behavior of geopolymer concrete (GPC) as compared to OPC concrete of similar compressive strength and containing the same size and type of aggregates. They found that the failure modes of the heat cured GPC specimens were generally more brittle than those of the OPC concrete specimens. Fracture energy of geopolymer concrete was similar to that of OPC concrete and fracture energy increased with compressive strength in both types of concrete. The critical stress in tensity factor of the GPC specimens was higher than that of the OPC concrete specimens for the same compressive strength and the difference in the fracture behaviors of GPC and OPC concrete is because of the higher bond and tensile strengths of GPC. Das et al. [21] replaced ordinary Portland cement (OPC) by limestone or a combination of limestone and fly ash/metakaolin and they observed that the new phases inside the mortar matrix can lead to enhanced fracture mechanics properties and ductility. Nikbin et al. [22] studied the fracture characteristics, such as fracture energy and Kic, of self-compacting concrete using notched three-point bend specimens for specimens with different coarse aggregate volume percent. 2. Materials and Test Methods 2.1. Materials, specimens and testing The Multi Walled Carbon Nanotubes (MWCNTs) that used in the present work were synthesized via catalytic chemical vapor deposition and were commercially available by Shenzhen Nanotech Port Co. Ltd. (Shenzhen, China). Their nominal purity was higher than 97% and their amorphous carbon content was less than 3%. The nominal tube diameter ranged from 20 to 40 nm while their length ranged from 5 to 15 ÃŽÂ ¼m. In table 1 is shown the properties of multi-wall carbon nanotubes. Viscocrete Ultra 300 (Sika AG, Baar, Switzerland), a water-based superplasticizer comprised of polycarboxylate polymers was used as dispersion assistive agent; it was selected based on its efficiency in inhibiting air entrapment inside the specimens as well as because of its excellent resistance to mechanical and chemical attack. Table 1: Properties of multi-wall carbon nanotubes Parameters Values Type multi-wall CNTs Length 5-15 ÃŽÂ ¼m Main range of diameter 20-40 nm Production method: catalyzed CVD Purity à ¢Ã¢â‚¬ °Ã‚ ¥ 95% Ash à ¢Ã¢â‚¬ °Ã‚ ¤ 0.2 wt% Special surface area 40-300 m3/g Amorphous carbon à ¢Ã¢â‚¬ °Ã‚ ¤ 3% For the production of nanocomposite mortar with tube loadings variable within 0.2, 0.4, 0.5, 0.6 and 0.8 wt% of cement, the following experimental protocol was adopted. Initially, superplasticer with MWCNTs at a ratio of 1.5/1 added in regular tap water and then follow magnetic stirring for 2 min. The resultant suspensions were subsequently ultrasonicated for 90 min at room temperature by aid of a Hielscher UP400S device (Hielscher Ultrasonics GmbH, Teltow, Germany) equipped with a cylindrical 22 mm diameter sonotrode delivering a power throughput of 4500 J/min at a frequency of 24 kHz. The specific combination of ultrasonication parameters was established as optimal for achievement of suspension homogeneity without tube aspect ratio impairment [15]. The ultrasonicated suspensions were transferred, along with ordinary Portland cement type I 42.5N and natural sand into the bucket of a rotary mixer where it was mixed for a total of 4 minutes, in low and high speeds sequentially, as per standard test method BS EN 196-1. Immediately after mixing, the fresh mortar was poured into metallic oiled formworks, volumes of 160x40x40 mm3, where it was left for 24 hours before demolding and subsequent placement into a 100% humidity room for duration of 28 days. A total 50 specimens were prepared, divided into two sets of five specimens at each CNT formulation, 0.2, 0.4, 0.6 and 0.8 wt% of cement. In one set, suspensions were further processed in a vacuum environment for removal of entrapped air before they were mixed with the cement and sand by aid of a rotary mixer. Additional mixtures without nanotubes were also prepared for reference purposes. The above procedure is shown schematically in fig. 1. After 28 days maturation were created a notch in specimens with cut-wheel with depth 20mm. Figure 1: Schematic representation of the nano-modifield mortars manufacturing process [5] In addition fig. 2 depicts the as-processed state of MWCNT-reinforced concrete specimens with varying tube loadings. The bottom row depicts reference specimens, whereas the top and middle rows show specimens with tube loadings of 0.6 and 0.2 wt% of cement, respectively, wherein porosity appears to increase with nano-reinforcement concentration. Figure 2: Various amounts of carbon nanotube loadings inside cement matrix: 0.6 wt% of cement (top row), 0.2 wt% of cement (middle row) and plain cement (bottom row) 2.2 Acoustic Emission Monitoring Large concrete structures like buildings, storage tanks, bridges, dams, offshore structures, flyovers require reliable non-destructive testing methods for assessing structure integrity. Acoustic emission is a widely used technique for monitoring concrete structures, and is based on the phenomenon of the rapid release of energy from different localized sources inside a material generating elastic waves [23]. Such stress waves propagate through the solid due to energy released during the deformation process and the amount of acoustic energy released depends on the size, the speed of the local deformation process and the material. AE can detect lesions such as crack growth, fracture growth, monitoring deformations, corrosion etc. in a wide range of materials. The transducers are usually piezoelectric and transform the energy of the transient elastic wave to an electric waveform which is digitized and stored. The AE sensors record the accumulated activity which is indicative of the sever ity of cracking. Certain indices based on the magnitude or the number of the AE signals has been employed successfully in the health monitoring of heterogeneous structural materials like concrete and composites. In addition, when multiple sensors are applied, apart from the number of AE hits, it is possible to be found the source of events because of the time delay between the acquisitions of the corresponding signals at different sensors. This allows the estimation of which part of the material needs repair, which is of paramount importance for large-scale structures. Also via AE the materials mode of fracture can be studied and characterized [24-26]. However, there are other important aspects of the AE testing, which are based on the qualitative parameters of the received signals. It has been seen that the shape of the waveform is indicative of the fracture type, something very important for the classification of cracks in different materials. Shear cracks follow tensile cracks as damage is being accumulated within the material. Therefore, the characterization of the cracking mode can act as a warning against final failure. It has been shown that tensile events are linked to higher frequency content and higher RA value, fig. 3, than shear [27-30]. This is mainly due to the larger part of energy transmitted in the form of shear waves, which are slower; therefore, the maximum peak of the waveform delays considerably compared to the onset of the initial longitudinal arrivals, This kind of classification has proven useful in laboratory conditions concerning corrosion cracking in concrete, fracture of cross-ply laminates, as well as d iscrimination between tensile matrix cracking and fiber pull-out during bending of steel-fiber reinforced concrete [31, 32]. In fig. 3 and in fig. 4 is given a typical AE signal and a typical AE signal due to different types of fracture respectively. Figure 3: Typical AE signal and parameters Figure 4: Typical AE signals due to different types of fracture 2.3 Mechanical performance Determination of the fracture toughness by means of three-point bend tests on notched beams In the present study for calculation of the critical fracture toughness of cementitious materials used the Hilleborgs [33] crack model of concrete which is similar with Dugdale-Barenblatt crack model of metals. For cementitious composite materials, such as mortar or concrete, the fracture toughness is determined using linear elastic fracture mechanics (LEFM) considerations. The P-CMOD response is obtained from notched beams, subjected to the center-point loading conà ¯Ã‚ ¬Ã‚ guration shown in fig. 5. The tests are performed under CMOD control, where this parameter is measured using a clip gage mounted on knife-edges. The thickness of the knife-edges, d, is taken into account in the calculations. Figure 5: Three-point bend test configuration for notched beam specimen For this geometry, the stress intensity factor (KI) is given by where P is the applied load, a is the crack length and ÃŽÂ ± = a / W is the relative crack length (with S=3W and ÃŽÂ ±o=ao/W=0,25). The geometry dependent function, f(ÃŽÂ ±) is determined using two-dimensional plane stress analysis and is given by Where when when Also, in a similar way, where the dimensionless geometry-dependent function, g(ÃŽÂ ±), is given by Where when when As it is evident from fig. 1, the CMOD is not measured exactly at the notch mouth but at a distance d, which must be taken into account for determining the real value of CMOD from that measured in the test (denoted as CMODMesured). Therefore, The conversion factor kd can be determined, for 1 mm d 6 mm, from The coefficients used to compute kd for the CMOD correction are given in table 2 for different knife-edge thicknesses. Table 2: Coefficients used to compute kd for the CMOD correction d(mm) h1 h2 h3 h4 1 0.0050 275.1 275.9 0.0399 2 0.1508 162.5 163.6 0.0118 3 0.1037 104.1 105.1 0.01631 4 0.0777 76.2 77.2 0.0137 5 0.0623 60.2 61.1 0.0117 6 0.0521 49.7 50.6 0.0106 For large ÃŽÂ ± (> 0,4) the correction is insignificant, hence for specimens with relative notch lengths in the order of 0,4, no correction needs to be applied. Moreover, for thin knife-edges (d Determination of the fracture energy by means of three-point bend tests on notched beams The fracture energy is defined as the amount of energy necessary to create one unit area of a crack. The area of a crack is defined as the projected area on a plane parallel to the main crack direction. This test method is not recommended for fiber-reinforced concrete. The fracture energy is determined by the equation, [N/m (J/] Where, Wo (Nm), is the area under the load-deformation curve shown in fig. 6 (kg) ; m1 = weight of the beam between the supports, calculated as the beam weight multiplied by S/L (fig. 1). The length L of the beam as well as the span S during the test must be measured with an accuracy of at least 1 mm; m2 = weigth of the part of the loading device touching the beam which is not attached to the testing machine, but follows the beam until fracture; g = acceleration due to gravity (9,81 m/s2); ÃŽÂ ´o = deformation of the beam at fracture (m), as shown in fig. 2; Alig = area of the ligament (m2), defined as the projection of the fracture zone on a plane perpendicular to the beam axis. Figure 6: Load-deformation (CMOD) curve Test procedure for fracture energy measurement The test is performed with an approximately constant rate of deformation, which is chosen so that the maximum load is reached within about 30-60 seconds after the start of the test. The deformation of the center of the beam and the corresponding load are registered until the beam is completely separated into two halves. In case the deformation is not measured directly on the specimen it is recommended that before measuring the load-deformation curve the load is cycled 3 times between 5% and 25% of the expected maximum load. The load should be measured with an accuracy of at least 2% of the maximum value in the test. The deformation must be measured with an accuracy of at least 0.01 mm. Finally, the Crack Mouth Opening Displacement (CMOD) will be monitored during the test performed with controlled load in a closed-loop testing machine. The load will be applied at a rate between 2 and 3 N/s. A plot of CMOD versus applied load will be produced. Mechanical characterization under three po int bending testing was performed on an Instron 5967 testing frame (Instron, Norwood, MA, USA) equipped with a 30kN loadcell. For the accurate recording of displacement C.M.O.D were used a Crack Opening Displacement (COD) Gauge extensometer with gauge length 10mm by Instron company. 3. Results and Discussion The effect of CNT presence and concentration to the flexural and compressive strength has investigated in previous study. The researchers were observed that subjection of the suspension to the vacuum-assisted air removal procedure significantly enhanced the materials flexural strength, compared to non-vacuumed suspensions. The maximum improvement in flexural strength, compared to the control specimens for vacuumed suspensions, appeared at 0.4 wt% MWCNT loading and was approximately 17% improvement at 0.2, 0.6 and 0.8 wt% loadings were 12, 10 and 9% respectively [4]. In the present study, the fracture energy of vacuum and non-vacuume nanocomposite mortar, Gf, as the way the fracture energy effects on the acoustic emission energy are investigated. In respect to the flexural strength the researcher observed that the specimens had the similar behavior as shown in table 3. The flexural strength calculated by using the following equation, where L, B, W and a0 are specimens dimensions prese nting in fig. 5. à Ã†â€™ = Table 3: Comparison results of Flexural strength between specimens with and without notch. Flexural Strength[MPa] [4] Flexural Strength with notch[Mpa] CNT loading, wt% of cement Non-VacuumedSuspensions VacuumedSuspensions Non-VacuumedSuspensions VacuumedSuspensions 0 (plain) 5.36  ± 0.38 5.43  ± 0.23 5.72  ± 0.21 5.64  ± 0.25 0.2 4.15  ± 0.28 6.09  ± 0.43 4.73  ± 0.22 5.98  ± 0.11 0.4 4.61  ± 0.48 6.34  ± 0.67 5.00  ± 0.34 6.74  ± 0.13 0.6 4.97  ± 0.36 6.01  ± 0.66 4.83  ± 0.33 6.12  ± 0.31 0.8 4.78  ± 0.21 5.92  ± 0.5 4.87  ± 0.28 6.35  ± 0.39 It is widely known that CNTs increase the mechanical properties. Table 4 shows the results of effect of CNTs to the fracture energy, Gf, for vacuumed and non-vacuumed specimens. It is clearly that CNTs increase the fracture energy and the maximum value appears in the rate of 0.4% wt. cement CNTs. Above the rate of 0.4% there were reduction in the fracture energy however the values of Gf continues are higher than control specimens. In addition, all non-vacuumed specimens showed slightly elevated values than the control specimens but lower for vacuumed specimens because of porosity which is created because of CNTs. Table 4: Comparison results of Fracture energy between Vacuumed and Non-Vacuumed suspensions Fracture Energy [N/m (J/m2)] CNT loading, wt% of cement Non-VacuumedSuspensions VacuumedSuspensions 0 (plain) 1.1655  ± 0.063 1.1281  ± 0.060 0.2 1.1681  ± 0.122 2.0338  ± 0.086 0.4 1.6910  ± 0.115 6.5373  ± 0.369 0.6 2.1460  ± 0.050 2.9987  ± 0.383 0.8 1.8185  ± 0.200 2.4623  ± 0.165 Except for plain specimens which had similar fracture energy, the fracture energy of the specimens which had been in vacuum was increased. Gf of the nanocomposite with 0.2% and 0.4% wt. cement CNTs was found to be higher at about 80% and 479% respectively related to control specimens while for 0.6% and 0.8% wt. cement CNTs was found an increment at about 166% and 118% respectively. On the other hand, non-vacuumed nanocomposite specimens with 0.2% wt. cement CNTs were found it that had limited growth about only 0.2%. Greater increase of approximately 45%, 84% and 56% showed the nanocomposites specimens with 0.4 %, 0.6% and 0.4% wt. cement CNTs respectively. Comparing the two types of mixtures, vacuumed and non-vacuumed, the results showed that the fracture energy increment for all rates for vacuumed specimens. Specifically, for the rates 0.2% and 0.4% wt. cement CNTs the increments were about 74% and 287% respectively while for 0.6% and 0.8% wt. the increments were only 40% and 36% re spectively. The entire above are shown in fig. 7. Finally, fig. 8 shows a typical load-CMOD graph for all rates, 0% up to 0.8% wt. cement CNTs, of vacuumed nanocomposite specimens and non-vacuumed specimens. Figure 7: Diagram of Fracture Energy, Gf, results Figure 8: Typical load-CMOD curve for all rates of nanocomposite specimens for a) vacuumed and b) non-vacuumed are presented. For Acoustic Emission (AE) monitoring in real time under three point bending tests of CNT-reinforced concrete specimens two R15a AE sensors were used, with broadband response ranging from 50 to 400 kHz and a maximum sensitivity at 150 kHz, attached on the lower section of the specimen. The R15a is a narrow band resonant sensor with a high sensitiv

Wednesday, October 2, 2019

Jean Rhys Use of Conflicting Narratives of Antoinette and Rochester in

Jean Rhys' Use of Conflicting Narratives of Antoinette and Rochester in "Wide Sargasso Sea" There are many techniques Jean Rhys uses to bring across the point that the narrators are unreliable and the truth twisted, it is an interesting and effective idea as it makes the reader feel confused on who to trust and really involves them in the book, they become party to the secrets. Rhys’ book is so complex as it is obviously linked to the Classic book- ‘Jane Eyre’; this is classic English literature and therefore is always in our minds during WSS. Those that have read ‘Jane Eyre’ normally like to trust Jane as she is a heroine who we have sympathy for; we are introduced to her from when she is young so we know and understand her and how she behaves. Also in ‘Jane Eyre’, Mr.Rochester comes across very innocent, you believe he is trustworthy and that he loves Jane, you want them to be happy together- when he reveals his 'mad wife' to Jane you feel sympathy for him as he is in such a bad situation, you also feel sympathy for Jane; you feel resentful towards Bertha as she ruined what Jane and Rochester could have had; it is easy to feel like this as you don’t know her, as you do in WSS. Bertha, in ‘Jane Eyre’, gets locked up in a luxury place; it seems she has her own 'quarters' unlike in WSS. When you read WSS I felt less sympathy for Mr.Rochester because you don’t really get the impression that he loves Antoinette and that he is only marrying her for money. Another factor that creates contrast between these novels is it is set in a midst of strange confusing things (WSS) and a completely different culture, which is chaotic and primitive, this makes us more misplaced. Whereas in ‘Jane Eyre’ the culture is... ...ve in Jane. However I think eh main reason why I find Antoinette more credible is because we here from her from the start, when she is young. When we are first introduced to Rochester’s narrative we are lost in the switch from part to part so we don’t get so in-depth with him, Antoinette starts the novel so we trust her account; it’s the first we hear. I generally feel more sympathy for her two as she was never favoured or appreciated as a young child, rejected by her mother, father, only friend Tia (who steals her dress), when she is finally accepted by Richard Mason (stepfather) it is to sell her off to Mr. Rochester who then accepts her but late rejects her by- sleeping with her slave whilst she can hear them. She has little power as a woman and so has to live with these changes made by others. This is why I feel sympathy for Antoinette over Rochester. Jean Rhys' Use of Conflicting Narratives of Antoinette and Rochester in Jean Rhys' Use of Conflicting Narratives of Antoinette and Rochester in "Wide Sargasso Sea" There are many techniques Jean Rhys uses to bring across the point that the narrators are unreliable and the truth twisted, it is an interesting and effective idea as it makes the reader feel confused on who to trust and really involves them in the book, they become party to the secrets. Rhys’ book is so complex as it is obviously linked to the Classic book- ‘Jane Eyre’; this is classic English literature and therefore is always in our minds during WSS. Those that have read ‘Jane Eyre’ normally like to trust Jane as she is a heroine who we have sympathy for; we are introduced to her from when she is young so we know and understand her and how she behaves. Also in ‘Jane Eyre’, Mr.Rochester comes across very innocent, you believe he is trustworthy and that he loves Jane, you want them to be happy together- when he reveals his 'mad wife' to Jane you feel sympathy for him as he is in such a bad situation, you also feel sympathy for Jane; you feel resentful towards Bertha as she ruined what Jane and Rochester could have had; it is easy to feel like this as you don’t know her, as you do in WSS. Bertha, in ‘Jane Eyre’, gets locked up in a luxury place; it seems she has her own 'quarters' unlike in WSS. When you read WSS I felt less sympathy for Mr.Rochester because you don’t really get the impression that he loves Antoinette and that he is only marrying her for money. Another factor that creates contrast between these novels is it is set in a midst of strange confusing things (WSS) and a completely different culture, which is chaotic and primitive, this makes us more misplaced. Whereas in ‘Jane Eyre’ the culture is... ...ve in Jane. However I think eh main reason why I find Antoinette more credible is because we here from her from the start, when she is young. When we are first introduced to Rochester’s narrative we are lost in the switch from part to part so we don’t get so in-depth with him, Antoinette starts the novel so we trust her account; it’s the first we hear. I generally feel more sympathy for her two as she was never favoured or appreciated as a young child, rejected by her mother, father, only friend Tia (who steals her dress), when she is finally accepted by Richard Mason (stepfather) it is to sell her off to Mr. Rochester who then accepts her but late rejects her by- sleeping with her slave whilst she can hear them. She has little power as a woman and so has to live with these changes made by others. This is why I feel sympathy for Antoinette over Rochester.

Confessions of a Chronic Shopper :: Personal Narrative Shopping Toys Papers

Confessions of a Chronic Shopper It began with Barbie. I received my first at age four, and for awhile, I was happy with just that one. But when I walked down the all-hot-pink aisle at Target, I couldn’t help but need another. Magic Moves, Peaches and Cream, Crystal. Barbie and the Rockers. And then came the accessories. Barbie’s pink Jeep. Barbie’s bed and bedroom furniture. Kitchen accessories. Gym equipment. A tall Barbie house with an elevator. My sister and I had the works. We would set up luxurious Barbie mansions and would select from a bottomless Barbie pit four or five Barbies apiece, creating elaborate plots that could contend with any of the afternoon soap operas. Their days consisted of primping, changing clothes at least 35 times, ordering miscellaneous stuff advertised on the radio, and dating. And with only a Ken and a Derek to go around for eight Barbies, there was much stealing of boyfriends. They led extremely enriching lives. Then Cabbage Patch Kids were born. Since they were in such high demand, it was agony wondering if I’d even get one. But Grandma Bonnie and Grandpa Leo were successful on Easter of 1985. Although Grandpa had to literally fight with a woman in the aisle of Toys ‘R Us over the last Cabbage Patch on the shelves, he won, thank goodness, so that I could have Martina. Martina Dorisa. But after awhile, Martina needed a playmate. And another. And a fourth. So, I acquired three more—Billy, Gary, and a little premie named Felice. My sister had four as well, and ironically, when we played with them, we would pretend that we were destitute single mothers. The home we set up was underneath the ping-pong table in our basement, cramped quarters for two girls and eight babies. But we were impoverished, after all. In all honesty, however, I cannot remember a day when I ever felt the scarcity of money —whether it was the fear that I might not be getting another meal or that I might not be getting another Christmas present. As the fourth and youngest child in my family, my parents were in their thirties and well-established when I was born. While my older siblings felt the consequences when my parents struggled to make ends meet, I never had to witness such financial straits or worry about money at all. I grew up knowing only affluence, receiving almost any desire I entertained, and so consumption naturally became a part of my life, just as some children who are born into poverty naturally understand privation and want as a natural way of life.

Tuesday, October 1, 2019

Medieval Archetypes Utilized in Hamlet Essay

Hamlet by William Shakespeare is a complex play because of its multiple dimensions. Upon dissection, the influence of other works can be observed in it. One of the most prominent of these works is the York â€Å"Fall of Man†. This particular play is a very poor remake of the book of Genesis in the bible. However, William Shakespeare utilizes the medieval traditions exemplified in the â€Å"Fall of Man† to create the characters in Hamlet. For example, Hamlet’s mother, Queen Gertrude, shows an uncanny parallel to Eve from the â€Å"Fall of Man†. Gertrude’s behavior and characteristics fall under the archetype presented in the rendition of Genesis. Eve can be described as: gullible, naà ¯Ã‚ ¿Ã‚ ½ve, accidentally rebellious, trusting, curious, manipulated, and egocentric. These same traits can be used to identify Gertrude’s personality as well. In part three of the â€Å"Fall of Man†, Satan, in the form of the worme, is trying to convince Eve to rebel against God by eating the forbidden fruit. The worme claims that it will make her omnipotent. When Eve questions Satan, he replies, â€Å"Why trowes thou nog[h]t me?/ I wolde by no- kynnes ways/ Telle nog[h]t but trouthe to the[e]† (pg 270, line 75). In perhaps one of her most naà ¯Ã‚ ¿Ã‚ ½ve and gullible moments, Eve responds, â€Å"Than wille I to thy teching traste,/ and fange this frute unto oure foode† (78). Likewise, in Hamlet there is a moment that closely mirrors this. When King Claudius and Polonius decide to spy on the interaction between Hamlet and Ophelia, Claudius tells Gertrude to leave even though it is her son. She only answers,† I shall obey you† (III,I, 42). These two quotes show the extent to which both Eve and Gertrude have been manipulated by their curiosity and weakness. Eve only wanted to know if the fruit contained a certain power and Gertrude was interested in her son’s apparent â€Å"madness† yet both women put aside independent thinking and oblige the villain. Later in the â€Å"Fall of Man†, Eve brings the forbidden fruit to Adam saying â€Å"A worme has done me for to witte/ We shalle be as goddis, thou and I,/ If that we ete/ Here of this tree† (91). Then in Hamlet, Gertrude asks her son,† Have you forgot me?’ ( III, IV, 16). She is essentially asking if Hamlet has forgotten whom he is speaking to. In the â€Å"Fall of Man†, Eve portrays egocentric qualities. When she discovers the power of the fruit, she suddenly desires to share it with Adam so that they might be god- like together. She wants to be all knowing and powerful, so when she sees the chance she takes it. Gertrude is self-centered as well. She doesn’t want to lose her standing as queen when her husband dies so she marries his brother not even two months following his passing. When Hamlet confronts her on her actions she retorts with anger that he would dare speak to her in that manner. Both Gertrude and Eve have a mental self image of themselves that is better than what others perceive them as and both women strive to maintain/ improve that image. Gertrude’s character directly parallels that of Eve in respect to characteristics and traits. They are both archetypal characters but the resemblances are eerie. The women both end in similar manners as well. Eve eats the forbidden fruit and guarantees her banishment from the Garden of Eden. Gertrude drinks the poison and ensures her own death. The characters have too many similarities to be dismissed as coincidence. Ergo it can be stated with a level of confidence that William Shakespeare utilizes the medieval traditions outlined in the â€Å"Fall of Man† to write Hamlet. Works Cited Medieval Drama. Ed. David Bevington. Boston; Houghton Mifflin Company, 1975 Hamlet. William Shakespeare. Ed. Louis Wright. Virginia Lamar. New York; Simon & Schuster Inc, 1958